Dail to multiple numbers - creating a call group

Step 1

Open the callgroup manger in the intercom menu.

Step 2

Click the [ + ] button to create a new call-group. Enter a name (in the example we use exmapleexample call sequence)group) and select what type of call-method is used. In this case we use the "CalAll oneat bythe onesame time (sequence)simultaneously)" and then press [ Save ]

When saved, the system will confirm the creation of the group by displaying the editor for adding the receiving (target) intercom or phone devices.

Step 3

To add a target, simply click the [ + ] button and complete the form. Only the Name and "Who to Call" fields are required. The remaining options will be explained in the following paragraphs.

Click [ Save and Close ] when done.

The next step is to add all targets required for the call sequence.group. You may use:

• Phone numbers

• Intercom numbers

• A specific relation from that is managed/entered in the Relationship Management module (or added on the spot in this configuration by pressing het [+] button in the selection field.

Note that the option "Call Group" as target is not yet supported up till version 5.0, nested call groups a available from version 5.2

Step 4

Once all targets are entered, you can configure the ring time for each target. When the call group is activated all targets are dialed simulaniously. Every target and,has ifit's necessary,own adjustmaximum theirringtime. order.

In ourthe example,configured weexmaple, movedafter Phone60 seconds phone 2, 3 and 4 will stop ringing and only phone 1 will continue to the top of the sequence and set its ring time to 30 seconds. The sequence is now as follows:ring.

1. Phone 3 — wait 30 seconds

2. Phone 1 — wait 15300 seconds

3. Phone 2 — wait 1560 seconds

4. Phone 3 — wait 60 seconds

5. Phone 4 — wait 1560 seconds

Since we selectedWhen the optionconfiguration "Start again frommeets the top until the maximum call time of 300 seconds is reached," the sequence will repeat from the beginning until a call is answered or the 300 second limit is reached.

When ready,requirements, hit [ save and close ]

Daily, starting on date first activation 

The target is only enabled in the call sequencegroup if the date and time match the configuration.

• The "Date of First Activation" determines when the target becomes active for the first time.

• The "Repeat Until" field sets the last date the target remains active in the sequence.group.

This means the target will be active every day, starting from the first activation date, until the repeat-until date is reached (if specified).

One day a week starting on the date of first activation.

The weekly schedule also begins on the date of first activation. For example, if the first activation occurs on a Wednesday, the target will be enabled every Wednesday thereafter.

If a "Repeat Until" date is configured, the target will automatically be disabled in the sequencegroup once that date is reached.

One day a month starting on the date of first activation.

The monthly schedule begins on the date of first activation. For example, if the activation date is the 13th of the month, the target will be enabled on the 13th of every subsequent month.

If a "Repeat Until" date is configured, the target will be disabled in the sequencegroup after that date is reached.

The schedules takes the real day of the month, so take in mind that not every month has the same number of days.

One day a year starting on the date of first activation.

This schedule can be use for configuring fixed holiday's for example. Take chrismas or new years day. 

If a "Repeat Until" date is configured, the target will be disabled in the sequencegroup after that date is reached.

On set days.

Use this scheduling option whenever a specific target (for example the reception of an office) needs to be included in the secuence on work days.

In the example we configured the target to be enabled in the sequencegroup from monday to friday from 9:00 till 17:00.