Unstable Intercom Connection Despite Stable Network (Ping OK)

Symptoms

The intercom device status continuously changes between "Available" and "Disconnected" even though the device is reachable on the network.

Related symptoms

• Intercom registration appears unstable
• Intercom goes offline and online repeatedly
• Device shows as disconnected while ping remains stable
• Calls to the intercom sometimes fail ( during connection losses )
• Error message when calling the intercom:
  "Could not initiate call because the destination is not available for calls"
  

Details

This issue can be recognized by observing the device status in the system:

• The intercom successfully registers initially
• After a short time, the device status changes to Disconnected
• Shortly after, the device registers again and becomes Available
• This cycle repeats continuously

Even though the network connection appears stable (for example, ping tests are successful), the intercom is not consistently available for calls.

Cause

Short registration timeout

The configured registration timeout of the PBX device is too low.

This means:

• The registration expires before the intercom renews it
• The system temporarily marks the device as Disconnected
• The intercom then re-registers, causing the status to switch back to Available

Network Issue

Even when ping appears stable, there can still be network issues such as:

• Packet loss
• Delayed responses
• NAT session timeouts
• Firewall (mis)configuration

Solution / Resolution / How To

Increase Registration Timeout

References

• Start packet trace in CoCoS